|
 |
|
 |
|
|
|
| Home - Fax Repair - Error Codes - Fax Features |
|
|
|
|
Laser Printer Repair |
Xerox Error CodesXerox 555/575 to enter the Service Mode, press these keys: Menu * # * *Xerox 7024: If rollers are in good condition and an intermittent receive paper jam persists, replace the one-way gears that drive the belts (1 large white one, 1 smaller black one, both have roller bearings inside them). Older XEROX models: To enter AND exit the service mode, press menu * * *. To ram clear, enter the service mode then press menu * 3. While in the service mode, pressing enter * and a number between 0-9 to access other service settings. Xerox 7033 ram clear Enter or exit the service test mode by pressing exit * * * stop Test 16 = sensor test Xerox 7042 ram clear Press the service key located under the speed dial flip panel Press 1 1 0 1 Press start Press 1 3 (test #) Press 1 2 3 4 Xerox WC 665 series: Memory full, machine is locked up. Problem is a glitch in the programing of the main board. If customer is not using mailboxes turn off the mailbox feature and you have fixed the machine. What is happening is that the sending machine has something in its header that has to do with mailboxes. The machine cannot figure out what to do with it so it stores it in memory, forever. Xerox 7041, 7042 LP 14 Bad transfer corona assembly. Replace with a new one, have had no luck in trying to fix them. Xerox WC 657 Memory error 21, turn the machine off and then on will usually clear error. If it continues replace memory board then main board Xerox Various lasers Printer error 21, replace fuser. |
 |
 |
|
Denver Colorado PHP Programmer Web Developer Resume
:::